Model Number: ADSS cable
Fiber Type: G657A1
Strength member: FIberglass Reinforced Plastic (FRP)
Jacket Material: PE PVC
Structure: Multi Loose Tube
The fibers are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of Kevlar. Between the Kevlar yarn and the loose tube water-blocking material is applied to keep the cable compact and watertight. The cable is completed with a polyethylene (PE) sheath.
Characteristics:
1. Good mechanical and temperature performance.
2. High strength loose tube that is hydrolysis resistant.
3. Special tube filling compound ensure a critical protection of fiber.
4. Crush resistance and flexibility.
5. Two parallel steel wires ensure tensile strength.
6. Small diameter, light weight and friendly installation.
1. This specification covers the general requirements of single jacket ADSS dielectric Cable for aerial or duct.
2. The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed.| Item | Value |
| Model Number | ADSS |
| Type | Outdoor Fiber Optic Cable |
| Place of Origin | China |
| Guangdong | |
| Brand Name | Wirenet |
| Number of Conductors | ≥ 10 |
| Application | Aerial for power cable transmission line |
| Losse tube used | yes |
| disign life | over 30years |
| conductive metal elements | no |
| PE/AT inner sleeve | 0.9mm |
| large span length | over 1000m |
| Storage/operating Temperature | -40°C to +70°C |
| Product name | dielectric 12 core single mode adss cable,ADSS fiber optic cable |
| MOQ | 1KM |
| keywords | adss fiber optic cable |
Contact Us
GET IN TOUCH AND REQUEST A QUOTE
