12 Ports SC UPC Connector Optical Fiber Polishing Jig Polish Fixture

       Special designed for SC/UPC connector polishing,12 connectors can be placed for polishing at the same time,Parts may be replaced on the jig, it is effective for polishing cost saving, Both left-handles and right-handles are provided to suit operation need, Water inlet design of the jig comply with the outlet of polishing machine, Easy to expel the dust out during polishing operation

Application:

* After polishing with 30um, 9um, 3um, 1um polishing film, each time before you change the polishing film, the fiber polishing jig needs to be cleaned in the Ultrasonic Cleaner with clean water, to make sure the 

fiber polishing jig get rid of the polishing dust, then use clean paper to dry the jig

* Each time, when the fiber polishing jig is not used, to make sure it is clean by the water, and use the clean paper to dry it, then put the polishing jig in a clean place 

* If the connector slot is stackable with dust or other solid, do not clean the jig with Alcohol. Remember to clean the jig with clean water, if you cant get rid of the dust from the connector slot, you can send the jig back 

to us, we will help deal with it. Pls DO NOT use any chemical liquid to clean the jig